Is it possible to tint the number plate on the car yourself? If the car license plate has been erased, can it be repainted? For this you need a standard list of documents

When driving on city highways and roads with a dense number of road users, there is a high risk of damaging not only the car, but also the registration plates in an accident.

Dear readers! The article talks about typical ways to resolve legal issues, but each case is individual. If you want to know how solve exactly your problem- contact a consultant:

APPLICATIONS AND CALLS ARE ACCEPTED 24/7 and 7 days a week.

It's fast and FOR FREE!

But most often, in addition to dents, scratches or chips, motorists are faced with the erasure of license plates on the car due to long-term use or some other reason.

All drivers should be aware of what a fine may be for them if they drive a car with erased license plates.

Possible reasons

Worn license plates on a car are very difficult to read, and from the standard distance of 20 meters it is almost impossible to completely identify them.

This suggests that it will be very problematic for traffic police to record an offender in such a car. Therefore, at the first discovery of scuffs, it is best to correct the situation - make a duplicate or, for a short time, slightly touch up the scuffed areas with black.

Designations on state registration plates may be erased for the following reasons:

poor quality paint;
manufacturing technology is violated;
metal that does not meet production requirements;
as a result of a collision during an accident;
the influence of reagents that get on license plates when driving, which are usually sprinkled on roads in winter against ice.

In addition, precipitation can also play a role in damaging the coating on the license plate.

Hail, rain, sleet and other impacts on the paint of state license plates may well scratch and gradually wear off the layers each time. The sun's intense rays can even affect paint so that it fades.

Flying sand, dust, small stones can still have an impact - all this if it gets on the state. number may damage it. If the numbers were defective and made of poor quality, then they can be erased after the first rain.

But it is very good that such cases occur extremely rarely. On average, the service life of registration plates is defined in the range from 2 to 3 years.

Is it possible to drive with erased license plates?

All state registration numbers on vehicles must be perfect, numbers, inscriptions and letters must be easy to read. In a word, the numbers must correspond.

Otherwise, if the traffic police discovers even the slightest violation regarding license plates, it could cost the car owner a pretty penny.

Based on the Administrative and Legal Code of the Russian Federation, unreadable license plates are subject to a fine of 5,000 rubles or seizure of the driver’s license for a period of one to three months in order to deprive the driver of the right to drive.

This measure was taken due to the fact that with erased license plates it is impossible to identify the offender in the event of an accident or other crimes of car laws.

If at a distance of 20 m from the car the license plates cannot be read, and it is not even possible to see at least one digit, then such license plates will be considered invalid.

At the same time, the police have no complaints about good visibility of the front license plates at night, but the numbers on the rear bumper should be easy to read from a distance of 20 m.

Unreadable and worn-out license plates should be distinguished. Sometimes it's the same thing. But sometimes an unreadable number can be due to simple dirt that just needs to be wiped off.

In general, the criteria for viewing license plates in practice are different for everyone. Let’s say someone manages to see the numbers even from 25 m, but someone from 5 m cannot see the signs.

To summarize, we can say the following - since you do not falsify the number and do not change its numbers and letters in any way, then you will not be fined for fraud.

The ideal parameters of state registration plates are that all inscriptions are clear and even. And the white reflective background must not be damaged in any way.

Is it possible to tint

Most drivers take a number of measures to preserve images on license plates for as long as possible. These can be specialized sprays, small metal meshes or films.

But it’s rare for anyone to do it on their own. Typically, such work is entrusted to specialists at a service station or other auto repair shops. It is not forbidden to tint only black, and you cannot paint anything with white.

It is prohibited to touch the reflective background of the signs in any way. Therefore, if the color coating has come off from the white background of the license plates, then there is no need to restore or tint anything yourself.

Traffic cops will never have any complaints about signs tinted with black paint, but they are always very picky about a white field. You can even get a fine from them for counterfeiting government signs.

When choosing black paint, be sure to choose a high-quality, water-resistant option. The number should be touched up after first removing it from the car.

The overall algorithm of actions will look like this:

First, the registration plates are carefully removed from the car.
Then you need to wash the sign itself.
Be sure to dry everything.
White areas of the background are covered with paper or masking tape, which can be easily removed later, without negative consequences for the coating.
Then, with a thin brush, black lines are applied in areas where the marks have been erased.
Be sure to let everything dry completely.

To ensure smooth lines, it is best to paint on a chair or table. Numbers and letters are usually voluminous, so there should be no problems with painting.

If you don't really like the brush, and you doubt that you will get straight lines, then it is best to paint with a black permanent marker. Choose a marker with a normal expiration date so that you don’t have to then select a shade.

Tinted numbers can approximately last for about 2-3 months. It all depends on what weather you most often drive in.

Replacement with duplicates

Regularly touching up license plates is not always convenient, so the best option is to have a duplicate of license plates produced by a special company or the traffic police.

Approximately for the price it may cost you about 2800-3000 rubles for a set of two plates. If you are puzzled by how to make a duplicate of the state. car registration number, you must prepare a registration certificate and a civil passport of the car owner in advance.

In terms of time, usually the production of a duplicate of state numbers does not last long. In a specialized organization, as well as in the traffic police, it will take approximately 30 minutes.

Therefore, it shouldn’t take all day. The only thing you need to pay attention to is the danger of counterfeiting. Therefore, duplicates should only be made in a trusted and reputable place.

In general, each driver has several options to correct the situation - tint the number plate, change it at the traffic police in the form of obtaining a duplicate, or reissue it with new state registration plates.

You can contact the traffic police for a duplicate at your place of residence; you don’t have to go to the exact territorial office where you previously registered the car.

If it is most convenient for you, contact not the registration department of the traffic police, but a specialized center that legally has the right to produce and issue registration numbers.

Typically, these companies work much faster than the government agency MREO.

You don't have to stand in line and wait for a duplicate to be made. But, if there are no such centers in your city or nearby the settlement where you live, then you will still have to contact the traffic police.

Then you just decide whether you need the old registration plates or whether you want to re-issue a new number. In the first case, you receive a duplicate, and in the second - a state one. number with completely different numbers and letters.

Registration of a new state number through re-registration

New numbers must always be issued at an institution that has the right to do this, maintain a database, etc. Another way to make your license plates normal and comply with all standards and GOSTs is to simply contact the traffic police to re-register your own car.

This option may only differ in cost. If you pay the maximum for a duplicate 3000 rub. for a set, then when re-registering the car with new license plates you will pay more.

Features of re-registration are as follows:

To begin with, by contacting the traffic police at the place of residence (registration) of the owner of the car, you should submit an application for re-registration.

In the application form, you must indicate that you want to reissue license plates in order to receive new numbers to replace the old ones. At the same time, there is even a chance to choose a beautiful number for your car, although you will need to pay extra for this.

This option can be useful, especially when there is a need to make other changes to the technical passport or vehicle registration certificate.

Even if the price of such a service is more expensive, nevertheless, you will be sure that the number you will receive is genuine, all the necessary data will be entered into the database and in accordance with all the rules.

What fines can be imposed for

In no case should you ignore the problem; you need to immediately repair the license plates if you have already noticed that they have worn off.

If the license plates are repainted in such a way that their designations change, and also if you drive with dented license plates, then the State Traffic Inspectorate employee will have every right to fine 5000 rubles.

In the event that the numbers are simply worn out, a fine by a traffic inspector will cost 500 rubles(). For the first time, they will not issue a fine, but they will issue a reprimand and warning.

The most severe punishment is payment of a fine and seizure of the driver’s license for a period of 2 to 3 months. Therefore, you should not take risks and drive a car with license plates that do not comply with the requirements of legal norms and regulations.

Some traffic police officers who have completely erased the license plates on their car may be counted as absent altogether. And with incorrectly corrected numbers, where the numbers and letters of the signs are difficult to read, it may happen that the police officer perceives this as forgery or fraud.

The operation of any car inevitably leads to the fact that license plates lose their original appearance.

As a result of exposure to rain, sand, stones and various reagents on the road surface, the symbols on the license plates can quickly be erased.

Since driving a car with unreadable registration plates is strictly prohibited, a logical question arises: is it possible to tint the license plates on a car?

Reasons for rapid deterioration of numbers

The condition of the license plate may depend on a number of factors.. The first is, of course, mileage: the greater it is, the higher the degree of wear of the numbers.

In addition, the decal may be affected by the conditions in which the vehicle is used. For example, driving a car in the city has much less impact on the paint than in harsh driving conditions.

Some car enthusiasts try to protect their license plates by placing them in special metal frames.

Also, the state license plate can be erased very quickly if the quality of its manufacture is low. So, it may be that the car owner ordered a duplicate number plate from a private company, but low-quality materials were used for production.

This can cause it to wear off and become unreadable after just a few months, and in some cases even after the first rain.

Fortunately, in practice such numbers are quite rare. Much more often, numbers wear out as a result of the banal effects of time.

By law, it is prohibited to operate a car with unreadable license plates. Ignoring this requirement may result in a fine of 500 rubles.

What to do if the license plate on your car is erased? Some people decide to tint their license plates. But is this legal?

Is it possible to tint license plates?

This question interests many car enthusiasts, but it is very difficult to find a definite answer to it.

On the one hand, the numbers are a state document that is prohibited from being changed or corrected. On the other hand, if even one letter or number is erased from the license plates, this will be a fair basis for issuing a fine from an attentive traffic inspector.

However, you must agree that making a duplicate or going through the procedure of replacing a state license plate every time is not a very tempting prospect.

Ultimately, we can conclude that touching up license plates is more likely allowed than prohibited..

The following arguments can be made:

The tinting procedure does not imply changing or correcting the number, since it only allows you to restore existing information and improve the quality of its perception.
There is not a single by-law or law that directly prohibits such a procedure.

So, it is allowed to tint numbers manually, however, one should take into account the state standards prescribed in ST RK 986-2012.

Thus, license plates must comply not only with the requirements for the font, size and thickness of letters and numbers, but also contain intact security elements.

These include holograms - these are negative or positive ellipses (with the KZ symbol), which are evenly distributed - over the entire surface of the license plate, at a distance of five centimeters from each other, as well as a three-dimensional traveling wave.

What to do if the paint on your car license plates has worn off? Minor scratches and chips may be carefully touched up, and this should not cause any complaints from police officers.

However, repainting the entire surface of the license plate will violate the relevant standards, since the holograms will disappear and the surface of the license plates will lose its reflective properties.

So, tinting the letters and numbers on the license plate with black paint meets the requirements of GOST, because it does not change its visual appearance. Therefore, what is not prohibited must be permitted. There's nothing illegal about this, that's for sure..

Before you start painting the numbers, they need to be properly prepared..

To do this, remove them from the car, wash them thoroughly and dry thoroughly. Then degrease the license plate and begin restoring it to its original condition.

To prevent black paint from getting on the white part of the numbers, carefully cover them with regular masking tape.. This way you will ensure that the car’s registration plate complies with GOST standards.

Having gone through the preparation stage, you should begin choosing paint, and for some this can become a whole problem, because the range for choosing black paint is immensely large.

In this case, the main thing is not to purchase non-waterproof types of coloring compositions (watercolor and gouache).

Is it possible to tint numbers on a car with a marker? Yes, and among them, the most convenient option for coloring is considered to be a black permanent marker with a thick rod and a beveled edge.

Having chosen a paint or marker, find a comfortable, bright place and get to work without haste. Experienced motorists do not recommend painting license plates while squatting in front of the car, since most likely the lines will turn out crooked and the white background will be stained with black paint.

The paint should be applied with a thin brush, carefully drawing out the boundaries of letters and numbers.

Self-tinted numbers should last at least 2 months. Their service life directly depends on the quality of the paint used and weather conditions.

Restoring license plates on your own has a number of advantages:

Low cost - painting materials should cost several hundred rubles.
It won't take much time to recover.
An excellent result - the rooms look beautiful.

The problem may be that not all car owners will be able to carry out the painting perfectly.. However, operating a car with license plates that do not meet the standard is prohibited by traffic regulations.

In addition, a real license plate painted in this way will look like a fake, and this will definitely arouse interest among police officers.

Video: How to tint a number

Duplicate license plate

Another way to restore a damaged number is to make duplicates.

In big cities you can easily find several companies engaged in this business within the framework of the law.

This method is much more convenient and faster than the first (the work can only take about half an hour), but its disadvantage is its high cost.

Thus, the cost of producing one issue for 2017 is about 1,500 rubles, and a set of two issues is more than 2,000 rubles.

To make a duplicate, you must provide the selected company with a vehicle registration certificate.

Complete replacement of signs

How to change license plates on a car if they are erased? To do this, you need to go to the traffic police, write an application, pay the state fee, and then get completely new license plates for the car.

This method is the most expensive of all those described above due to the cost of state duty. At the same time, its significant advantage lies in the fact that all actions take place officially, with the help of government bodies.

So, unreadable car registration plates require special attention. If this seemingly insignificant drawback is ignored, then the motorist should be prepared to pay a fine at any moment.

However, sooner or later, you will still have to start restoring license plates.

What to do if the license plates on your car are erased?

Good afternoon, dear reader.

Over time, the state registration plates (numbers) of any car lose their original appearance. Under the influence of rain, snow, sand, dust, reagents and other factors, the black paint on the numbers gradually wears out and the numbers become unreadable.

Different drivers' license plates wear out differently. The degree of wear depends primarily on the operating conditions of the car, on the mileage of the car, as well as on the quality of manufacture of the plates themselves. For example, in the case of a low-quality batch, the numbers may be erased after the first rain. Such numbers are quite rare in practice. More often than not, numbers wear out, so to speak, from time to time.

Today we will talk about what to do if the license plates on your car are erased. Let's get started.

Let's consider all possible options in turn.

Drive with worn out license plates

If a car owner is too lazy to deal with state registration plates, he can continue to drive with worn out license plates.

In this case, the maximum fine for an unreadable number, according to Part 1 of Article 12.2 of the Administrative Code, will be 500 rubles. Minimum - warning.

Tint the numbers yourself

Do-it-yourself number plate tinting may also occur, but some features should be taken into account:

1. Since you are not involved in counterfeiting state registration plates, a fine cannot be imposed on you.

2. State registration plates must comply with the requirements of GOST R 50577-93. Those. When you independently tint the digits of the license plate, you must also take into account the requirements of GOST. If you wish, you can study the full text of this document. Here I will list only its important features.

Basically, GOST requirements concern the reflective (white) part of the license plate. It must be made using special paints. If it so happens that the white part of your license plate has been erased, then you should not touch up the plates yourself; it is better to use one of the methods below.

As for black numbers, there are no requirements for light reflection. Those. The numbers can be tinted, the main thing is not to spoil the white reflective part of the registration plate.

If you decide to paint the numbers yourself, I recommend that you first cover the white part of the number with masking tape and only then touch up the numbers. This will protect the numbers from damage.

Ideally, before painting, the plates should be removed, washed, dried, degreased, and only then applied with waterproof paint. In the simplest case, you can limit yourself to using a black waterproof marker without preliminary preparation. However, the durability will be appropriate.

The advantage of touching up car license plates yourself is that the procedure is quite cheap. The downside is that if you haven't done this kind of thing before, touch-up can take a long time.

Production of duplicates of state registration plates

Another way to eliminate the lack of numbers is making a duplicate of them. Currently, private organizations can legally produce license plates. The cost of producing one number is approximately 1,500 rubles, a set of two numbers - from 2,000 rubles.

To make duplicates, you will need a vehicle registration certificate. Usually duplicates are made fairly quickly, often within half an hour.

In some cases, this method remains the only possible one. For example, if the car's license plate was stolen or it was significantly damaged.

Changing vehicle registration details

There is another way to update car license plates - change of registration data. The essence of the procedure is that you go to the traffic police and receive new numbers.

Disadvantages of this method:

high price. State duties in this case will amount to 2,850 rubles.;
you irretrievably lose your old car number (if for some reason you value it, it is better to use the production of duplicates).

Thus, depending on the degree of damage to the numbers, you can use one of the following methods:

let it be as it is;
tint the numbers;
make duplicates;
change registration data.

Good luck on the roads!

Please tell me a resolution, law or other regulatory act, according to which I, as a driver who has already paid 1500 for these two pieces of iron once, must do some kind of touch-up, making duplicates and other manipulations to make it easier for an employee to identify the car? It’s one thing when the number is erased in 3-4 years, it’s another thing when it peels off 3-6 months after they were issued by the traffic police. At the same time, the same laws prohibit protecting license plates from external influences with any foreign objects, including transparent glass, which would preserve its original appearance after a month, a year, or even 5 years.

Any product, like GRZ, has a warranty period. Try using the Consumer Protection Law.

What to do if the license plate on your car is erased

When driving on city highways and roads with a dense number of road users, there is a high risk of damaging not only the car, but also the registration plates in an accident.

But most often, in addition to dents, scratches or chips, motorists are faced with the erasure of license plates on the car due to long-term use or some other reason.

All drivers should be aware of what a fine may be for them if they drive a car with erased license plates.

Possible reasons

Worn license plates on a car are very difficult to read, and from the standard distance of 20 meters it is almost impossible to completely identify them.

Designations on state registration plates may be erased for the following reasons:

poor quality paint;
manufacturing technology is violated;
metal that does not meet production requirements;
as a result of a collision during an accident;
the influence of reagents that get on license plates when driving, which are usually sprinkled on roads in winter against ice.

In addition, precipitation can also play a role in damaging the coating on the license plate.

Hail, rain, sleet and other impacts on the paint of state license plates may well scratch and gradually wear off the layers each time. The sun's intense rays can even affect paint so that it fades.

Flying sand, dust, small stones can still have an impact - all this if it gets on the state. number may damage it. If the numbers were defective and made of poor quality, then they can be erased after the first rain.

But it is very good that such cases occur extremely rarely. On average, the service life of registration plates is defined in the range from 2 to 3 years.

Is it possible to drive with erased license plates?

All state registration numbers on vehicles must be perfect, numbers, inscriptions and letters must be easy to read. In a word, the numbers must necessarily comply with GOST 50577-93.

Otherwise, if the traffic police discovers even the slightest violation regarding license plates, it could cost the car owner a pretty penny.

Based on Part 2 of Art. 12.2 of the Administrative Legal Code of the Russian Federation for unreadable license plates, a fine of 5,000 rubles is imposed or the driver’s license can be seized for a period of one to three months in order to deprive the driver of the right to drive.

This measure was taken due to the fact that with erased license plates it is impossible to identify the offender in the event of an accident or other crimes of car laws.

If at a distance of 20 m from the car the license plates cannot be read, and it is not even possible to see at least one digit, then such license plates will be considered invalid.

At the same time, the police have no complaints about good visibility of the front license plates at night, but the numbers on the rear bumper should be easy to read from a distance of 20 m.

Unreadable and worn-out license plates should be distinguished. Sometimes it's the same thing. But sometimes an unreadable number can be due to simple dirt that just needs to be wiped off.

In general, the criteria for viewing license plates in practice are different for everyone. Let’s say someone manages to see the numbers even from 25 m, but someone from 5 m cannot see the signs.

To summarize, we can say the following - since you do not falsify the number and do not change its numbers and letters in any way, then you will not be fined for fraud.

The ideal parameters of state registration plates are that all inscriptions are clear and even. And the white reflective background must not be damaged in any way.

Is it possible to tint

Most drivers take a number of measures to preserve images on license plates for as long as possible. These can be specialized sprays, small metal meshes or films.

But it’s rare for anyone to do it on their own. Typically, such work is entrusted to specialists at a service station or other auto repair shops. It is not forbidden to tint only black, and you cannot paint anything with white.

When choosing black paint, be sure to choose a high-quality, water-resistant option. The number should be touched up after first removing it from the car.

The overall algorithm of actions will look like this:

First, the registration plates are carefully removed from the car.
Then you need to wash the sign itself.
Be sure to dry everything.
White areas of the background are covered with paper or masking tape, which can be easily removed later, without negative consequences for the coating.
Then, with a thin brush, black lines are applied in areas where the marks have been erased.
Be sure to let everything dry completely.

To ensure smooth lines, it is best to paint on a chair or table. Numbers and letters are usually voluminous, so there should be no problems with painting.

If you don't really like the brush, and you doubt that you will get straight lines, then it is best to paint with a black permanent marker. Choose a marker with a normal expiration date so that you don’t have to then select a shade.

Tinted numbers can approximately last for about 2-3 months. It all depends on what weather you most often drive in.

How to check your car for license plate restrictions online, read here.

Replacement with duplicates

Regularly touching up license plates is not always convenient, so the best option is to have a duplicate of license plates produced by a special company or the traffic police.

In terms of time, usually the production of a duplicate of state numbers does not last long. In a specialized organization, as well as in the traffic police, it will take approximately 30 minutes.

Therefore, it shouldn’t take all day. The only thing you need to pay attention to is the danger of counterfeiting. Therefore, duplicates should only be made in a trusted and reputable place.

You can contact the traffic police for a duplicate at your place of residence; you don’t have to go to the exact territorial office where you previously registered the car.

If it is most convenient for you, contact not the registration department of the traffic police, but a specialized center that legally has the right to produce and issue registration numbers.

Typically, these companies work much faster than the government agency MREO.

Registration of a new state number through re-registration

This option may only differ in cost. If you pay the maximum for a duplicate 3000 rub. for a set, then when re-registering the car with new license plates you will pay more.

Features of re-registration are as follows:

To begin with, by contacting the traffic police at the place of residence (registration) of the owner of the car, you should submit an application for re-registration.

In the application form, you must indicate that you want to reissue license plates in order to receive new numbers to replace the old ones. At the same time, there is even a chance to choose a beautiful number for your car, although you will need to pay extra for this.

This option can be useful, especially when there is a need to make other changes to the technical passport or vehicle registration certificate.

What fines can be imposed for

In no case should you ignore the problem; you need to immediately repair the license plates if you have already noticed that they have worn off.

If the license plates are repainted in such a way that their designations change, and also if you drive with dented license plates, then the State Traffic Inspectorate employee will have every right to fine 5000 rubles.

In the event that the numbers are simply worn out, a fine by a traffic inspector will cost 500 rubles(Part 1 of Article 12.2 of the Code of Administrative Offenses of the Russian Federation). For the first time, they will not issue a fine, but they will issue a reprimand and warning.

For all such cases, you may well receive hefty fines, long-term seizure of your driver’s license, and even the opening of a criminal case for fraud.

Therefore, numbers and letters should be restored with extreme caution. And in order not to take risks, it is better to issue a duplicate number in a legal center.

What do the blue numbers on a car mean, see on the page.

Find out about checking a car for arrest by state number from the information.

Do-it-yourself tinting of license plates on a car

Is it possible to tint the state paint yourself? numbers on the car if their condition has become bad? Operating the machine causes the signs to lose their appearance. Exposure to rain, stones, sand and various reagents from the road causes the symbols on the license plate to be erased. It is prohibited to operate a vehicle with unreadable registration plates. How to paint a car license plate with your own hands? It's easy to do, but you need to follow certain rules.

The degree of wear depends on various factors. The more mileage the car has, the worse the condition of the license plate. Plates are also affected by the conditions under which the vehicle is used. Operating a car in the city has less impact on the condition of the paint than in more severe conditions.

Also, the license plate can quickly wear off if the workmanship is poor. For example, a person ordered a duplicate from a private company, but low-quality materials were used for production. This caused it to wear off and become unreadable after just a few months.

It is prohibited to operate a vehicle with unreadable license plates. Ignoring this requirement will result in a fine of 500 rubles. But you can protect yourself from the fact that the signs are erased. For this purpose, special frames are used in which the numbers are placed.

Is it possible to paint numbers

Many car owners are familiar with the situation when a number or letter has been erased and the number has become unreadable. If the number is damaged, it can be repainted. However, the plates are issued by the state and cannot be altered. However, the vehicle cannot be driven with an unreadable license plate.

Restoring yourself has many benefits. Firstly, it’s cheap, because the materials for painting the license plate will cost several hundred rubles. Secondly, immediate recovery will take a little time. After painting, the license plate will look normal, so you can drive the car without any problems.

Important! Self-recovery should not violate the number requirements. White color is the background and has reflective characteristics.

How to paint correctly

It is allowed to tint the numbers: if they are erased, you can restore them with your own hands. However, there are certain nuances. Since the signs are made using special paint, it is necessary to purchase a similar material for touch-up. Thus, the symbols on the numbers are painted black, and the background is painted white, which has reflective properties. All letters and numbers are clearly visible against its background.

If you decide to tint the number yourself, you only need to do this for the symbols. Painting a white background will cause it to lose its characteristics and will not reflect light, as required by GOST. And this will lead to the fact that the police can stop you and issue you a fine. If you paint the signs, there will be no problems, but you need to choose the right materials.

There are no special requirements for paint, but its choice should be based on the following rules:

do not use watercolor or gouache, because such paint does not have waterproof qualities;
use a thin brush to apply paint;
You can use a black marker.

The problem is that not everyone will be able to paint perfectly, and therefore the letters and numbers themselves may turn out crooked and uneven. If you decide to do the recovery yourself, do it in a comfortable place and without rushing.

If the numbers on your car have been erased and you use a marker, it should be a waterproof black marker. You can buy it in any store, but it must have the inscription “permanent” on it. It is made on the basis of alcohol, so it will not wear off quickly. A thick marker that has a cut at the end is best.

Before you start painting, the sign must be washed well in warm water and degreased. Next, dry it and get to work. To ensure even painting, the outlines of the symbols can be covered with tape.

After this, the status will be updated, and a car with such a state number can be operated without hindrance. If you managed to restore it yourself, the result will not last long. After 2-3 months, the paint will come off again, and you will have to repeat the procedure or get a new number.

Making new signs

If you do not want to paint the numbers yourself, you can contact a company that issues duplicates. They will not make a copy of the numbers for long - up to 1 day.

Some cities do not have such organizations. What should you do if your car's license plate is damaged in this case? The easiest option is to involve the traffic police and re-register the car. After completing the documents and paying the state fee, you will have new state license plates.

How to paint license plates

Any car must have its own unique state number, which is equivalent to a vehicle passport. If the vehicle number plate is partially erased or for any other reason it is impossible to read, the vehicle must be stopped from operating until the problems are corrected.

Most drivers try in every possible way to keep the license plate in order, using special sprays or metal mesh, but this will only slightly delay the necessary painting of the license plates.

Reasons for erasing license plates

If you look at the problem realistically, you can name dozens of reasons why the visibility of license plates, special sprays or metallic ones, can deteriorate, but we have identified only the main influencing factors that every car owner may encounter:

Poor quality paint or license plate material
Poor workmanship
Intentional or accidental physical impact with blunt or hard objects
Damage after an accident
Treating roads with salt and chemicals to remove snow in winter

The last point is a very serious problem. Sometimes, in one winter season, car license plates can become completely unusable and there are not many options here. Either contact the traffic police with a request to issue new license plates, which will cost a pretty penny, or visit a service station for restoration, or try to repaint the license plates yourself, spending only money on paint.

Pros and cons of touching up license plates

Wiping off the paint on license plates is a familiar problem for many vehicle owners. Is it possible to paint the license plates yourself if this part of the car is a state document, like an identification code or a number in a person’s passport. Corrections here are punishable by fines, but ordering duplicate numbers or completely changing them is also not the best option due to financial losses. Driving with poorly readable license plates can also result in a fine, so what should you do?

In the end, all the arguments boil down to the fact that touching up the license plates is the only low-cost option so as not to have problems with the law later. In fact, touching up the numbers and letters of a car has nothing to do with corrections or changes. This is only a partial restoration of information, improving readability, as well as long-distance perception. In addition, there is no law that prohibits touch-up procedures.

When producing state license plates, regular black and white paint is used. The black paint covers the embossed characters, giving the license plate a clear appearance against the white background without blending in or making it difficult to read in the glare of headlights.

Eyeliner or tinting of the white background is strictly prohibited, because it has a special coating that has good reflective properties.

Loss of light reflection entails a violation of GOST and may be a reason for the traffic police to issue a fine. Tinting black letters and numbers does not violate GOST requirements and does not in any way affect visual perception.

How to tint car license plates

If you need to tint the license plate of your car, it is important to choose the right paint. There are many different types of paints available in car service centers and hardware stores, and you can use almost any, but professionals advise choosing between nitro paint and oil paint. It is best to pay attention to good hydro- and frost-resistant paints.

Never use gouache or watercolor paints, as they are very unstable and can ruin your sign with streaks within a few days, making it impossible to restore it to its original appearance.

Step-by-step process of touching up license plates with paint

To paint a license plate, you need to prepare its surface for painting. Take a scraper or fine-grit sandpaper and very carefully sand down the old black symbols until the metal underneath the paint shows. You can use a blowtorch.
If there is corrosion on the metal, the places where it forms should be treated with rust converters.
Take a solvent and degrease the metal surface. You can cover the numbers and letters with a primer, in which case the numbers will last an order of magnitude longer.
The state number is painted with white automotive enamel, for example PF-115.
After drying, take a wooden board that is slightly longer than the number and stretch any thick fabric over it. Secure it to the board using a staple gun or small nails.
Apply paint to the fabric.
Carefully place the license plate with the convex side on the fabric. This method will be used to paint the border of the license plate.
Carefully peel the number from the fabric and let it dry.
The same procedure is carried out with the second number.

To avoid paint drips, dry the room only in a horizontal position!

Step-by-step process of touching up license plates with a marker

When using a permanent waterproof marker, you can restore characters painted in black paint without much time and money, without affecting the white background.

The surface of the license plate must be thoroughly washed and wiped, having previously degreased it.
It is better to choose a marker with a blunt end to minimize gaps in the old paint.
Place thin plastic or cardboard along the outline of the letters to prevent them from slipping onto the white background.

If the marker slips onto a white area, immediately and carefully correct your mistake using a cloth soaked in solvent. As a last resort, you can use baking soda, but there is a risk of damaging the white paint finish.

I got into trouble with my car. The license plate on the car has been erased, but I have neither the desire nor the additional funds to order a duplicate. A friend advised me to tint the numbers with a marker, carefully so that they were clearly visible, and not fool myself.

No sooner said than done. I armed myself with a black marker and colored in the numbers. I won’t go into details of how the traffic police officer found out about this, but as a result, I was given a fine for a tidy sum, and at home I started to figure out whether it was legal to correct car license plates with a marker. I will share the results of my investigation in this material.

The use of a vehicle sooner or later leads to the fact that the license plates issued during registration lose their appearance and can no longer be used. The appearance of the rooms is familiar to everyone. On a white background there are alphabetic and numerical symbols covered with black paint. Even taking into account the fact that the materials used are of very high quality, the paint wears off when exposed to rain and sand, stones and snow.

The result is a number unsuitable for travel, but only a few know how to correct the situation. Some car enthusiasts have found a way to resolve the problem by coloring numbers and letters with a special black marker, but it is not entirely clear whether this option can be resorted to.

What factors can negatively affect the rapid erasure of license plate paint?

A variety of factors can affect the condition of the license plate. First of all, we are talking about the significant mileage of the vehicle. The higher the mileage, the higher the degree of wear of the plates. In addition, the label may be affected by the operating conditions of the machine. The less negative factors affect the numbers, the better it looks.

Some drivers try to protect license plates by placing them in special frames, which gives certain results. To avoid damage, some people try to place a special film on the sign, but such actions do not give a positive result.

Sometimes it happens that the issued license plate was initially of poor quality and very quickly became unusable. The owner of the car just needs to order a duplicate. This can only be done by contacting a private company or government agency. Unfortunately, there is a group of fraudulent companies that produce low-quality signs, so you should approach this issue very carefully. Additional information on the topic of the note is presented in the video:

Is it allowed to tint numbers?

According to the law, you cannot operate a car without normal and clearly visible license plates. For this action, a citizen is issued a fine of 500 rubles. If the number is erased, it needs to be touched up. The answer to this question interests many car owners, but finding it is not very easy.

On the one hand, the license plate is an official plate and a unique alphabetic code, which are prohibited from being changed, corrected or damaged in any other way. On the other hand, the absence of paint on one symbol may become a legal basis for issuing a fine.

As for registering a duplicate, you need to go through this procedure in advance, and this will require a certain amount of funds. In addition, the possibility of tinting is not prohibited by law, so this is more likely to be possible than not.

What arguments do car owners give as reasons for touching up the paint?

Of course, every driver does not act at random, but first studies this issue in as much detail as possible. As a result, a small list of arguments was formed that are given in favor of a positive decision on this issue:

no amendments are made to the numbers, but only the quality of perception of the printed number is improved;
there are no legislative acts prohibiting such a procedure;
manual tinting is permitted provided that the artist takes into account the current state standards.

It is important to note here that we are not just talking about requirements for the font and thickness of letters, it is important that intact elements are placed on the signs. In other words, small chips and scratches can be carefully touched up with paint, but in such a way that traffic police officers do not have any questions.

Before you begin the procedure, you need to prepare everything for this. The number plates should first be removed from the car, then washed and degreased. After the numbers have dried, you can begin painting.

To avoid paint getting on the white part, you should carefully cover them with masking tape. For painting, it is recommended to use waterproof paint. A marker can be an alternative paint option, which is very, very convenient.

Instead of results

Instead of a conclusion, we can draw several small conclusions:

If the paint has peeled off the car number plate, then it is quite possible to touch it up yourself.
This procedure is permitted by law, but only on condition that the user follows all the necessary recommendations.
For painting, you need to choose waterproof paint, or it is better to use a special marker.

Most drivers try in every possible way to keep the license plate in order, using special sprays or metal mesh, but this will only slightly delay the necessary painting of the license plates.

Reasons for erasing license plates

ATTENTION! A completely simple way to reduce fuel consumption has been found! Don't believe me? An auto mechanic with 15 years of experience also didn’t believe it until he tried it. And now he saves 35,000 rubles a year on gasoline!

Poor quality paint or license plate material
Poor workmanship
Intentional or accidental physical impact with blunt or hard objects
Damage after an accident
Treating roads with salt and chemicals to remove snow in winter

Pros and cons of touching up license plates

Eyeliner or tinting of the white background is strictly prohibited, because it has a special coating that has good reflective properties.

How to tint car license plates

Never use gouache or watercolor paints, as they are very unstable and can ruin your sign with streaks within a few days, making it impossible to restore it to its original appearance.

Step-by-step process of touching up license plates with paint

To paint a license plate, you need to prepare its surface for painting. Take a scraper or fine-grit sandpaper and very carefully sand down the old black symbols until the metal underneath the paint shows. You can use a blowtorch.
If there is corrosion on the metal, the places where it forms should be treated with rust converters.
Take a solvent and degrease the metal surface. You can cover the numbers and letters with a primer, in which case the numbers will last an order of magnitude longer.
The state number is painted with white automotive enamel, for example PF-115.
After drying, take a wooden board that is slightly longer than the number and stretch any thick fabric over it. Secure it to the board using a staple gun or small nails.
Apply paint to the fabric.
Carefully place the license plate with the convex side on the fabric. This method will be used to paint the border of the license plate.
Carefully peel the number from the fabric and let it dry.
The same procedure is carried out with the second number.

To avoid paint drips, dry the room only in a horizontal position!

Step-by-step process of touching up license plates with a marker

When using a permanent waterproof marker, you can restore characters painted in black paint without much time and money, without affecting the white background.

The surface of the license plate must be thoroughly washed and wiped, having previously degreased it.
It is better to choose a marker with a blunt end to minimize gaps in the old paint.
Place thin plastic or cardboard along the outline of the letters to prevent them from slipping onto the white background.

There are many circumstances that
may result in abrasion of the number and paint from it. The most common of them: damage to
disasters, poor quality of stamping (there is a known case when they made a whole
defective batch, the numbers were erased in almost a week), also the impact on
number with hard objects, which can be either deliberate or accidental. But
there are drivers who deliberately damage their license plates so that they cannot be detected
video recorder. Some people use special sprays, others wear nets or number frames. U
Every person has their own tricks.

Is it possible to tint
number?

Many people are interested in this question, but let’s answer it
Even police officers cannot give a 100% answer. From 1st angle,
registration number - state document and entering configurations into it is prohibited. WITH
from a different angle, if even a particle of a letter or number is erased on the number, this
may serve as a basis for imposing penalties on the driver. Have to
constantly go through the shift function
numbers, or receiving duplicates. In any case, the procedure is not the most pleasant.

It turns out that you can touch up the number faster. The arguments will be
like this:

Touch up
does not in any way affect the correction of the number or the inclusion of any
configurations. What happens instead
restoration of information, moreover, it becomes more visible to everyone.
Not
there are laws or regulations that prohibit this
action.

But we should not forget that after all
actions, the number must correspond to the guest. Otherwise, you will create even more troubles for yourself.

Techno side

During production of standard car number plate
They use paint of two basic colors: dark and snow-white, not counting the flag.
Snow-white paint is the background. She also has
qualities to reflect light. Letters and numbers that should be marked with dark paint
clearly readable against the snow-white background.

So, never touch the snow-white paint! If you start tinting
background, reflective characteristics will be lost,
Ultimately, the number will not meet the requirements of the guest. And this is a good chance
for traffic cops to once again issue a fine and cause you unnecessary trouble. And if you tint the letters and
numbers in dark paint, then there will be nothing illegal in this.

What to paint with?

There is a lot of room for creativity here. Do not use
non-waterproof paint, like watercolor or gouache. It is very necessary to apply paint
carefully, preferably with a narrow brush. But not everyone will be able to apply a completely even straight line.
line, sitting on your knees in your own yard, because the letters may become skewed, and
the number will get dirty with paint, and eventually it will completely deteriorate.

Many motorists believe that a dark-colored permanent marker will also work here.
Maybe they're right and this is a good thing
candidate for paints. The marker must be permanently waterproof (they have
inscription PERMANENT). The base is alcohol. You can purchase markers at any stationery store.
stall or store.

Some tips for touch up paint

Better
choose a marker that has a thick shaft and the end is cut at an angle.
Before
Before you start restoring the number, you need to rinse it in warm water with car shampoo
and dry well.
By
abilities - before touch-up, you can remove the license plates from the car and carry out
restoration in a comfortable, dry and well-lit room.
So that
to get even stripes, you need to use a piece of cardboard or thick
paper. You need to place it next to the letters and quietly begin to trace them.
The outline will be even, and the excess paint will remain on the cardboard.
For what
time will stretch out the work, it depends only on the marker, but “new”
the numbers will last for at least 2 months.

Candidacy

In some towns there are companies that legally issue
duplicate numbers. If in your town or other populated area, for such
no one has taken over the business, you will have to go through the tedious re-registration function
car and receive new numbers, and maybe duplicates. For this you will have to
visit the traffic police department at your place of residence. If the number is very damaged, then others
there are no options available.